How do you install indoor unit of split air conditioning ?
Above question is commonly hear When people need to replace or install the brand new single zone or split air conditioner.
In this artilcle we are trying to share our experience which is help you for getting the proper installation quality.
Here are the 10 checklist consideration before we install the air conditioning.
The indoor unit of air conditioning should be intstall in a place where:
1. The restrictions on installation specified in the indoor unit installation drawing are met.
2. Both air intake and exhaust have clear paths, by mean we the indoor unit cannot install in a tiny space.
3. The indoor unit AC is not intalled on the path of direct sunlight.
4. The indoor unit AC should be install far away from the heat sources or steam.
5. The indoor unit AC should be avoided from source of machine oil vapor.
6. The unit is away from electronic ignition type fluorescent lamps (inverter or rapid start type). As these may shorten the remote controller range.
7 The unit is at least 3.5 ft (1 meter) away from any television or radio set (unit may cause interference with the picture or sound).
8 Do not install the units at or near doorway.
9 Do not operate any heating apparatus too close to the air conditioner unit or use in room where mineral oil, oil vapour or oil steam exist, this may cause plastic part to melt or deform as a result of excessive heat or chemical reaction.
10 When the unit is used in kitchen, keep flour away from going into suction air of the unit.
0 Comments